Cut stringstaircase.
The string is cut to the step profile, with the tread ends overhanging it.
Cut string staircase
The steel strings are cut to the step profile, with the tread ends overhanging them. Glass balustrades bolt to the tread ends behind stainless buttons or oak end caps.
- 10 mm steel plate strings cut to the step profile
- Tread ends overhang the string
- Stainless buttons or oak end caps
- Glass or steel balustrade
The other five designs
Every design is available in any RAL powder-coated colour, with clean glass or traditional steel balustrades, and an oak handrail or bare glass edge.
Cantilever
Treads fixed into a structural wall with no visible string – the purest floating look.
Treads 110 × 270 mm · glass on the open side
Centre spine
A single steel spine follows the step profile beneath the treads.
200 mm box section · 10 mm steel plate
Straight string
Clean, straight plate strings carry the treads, with glass fixed straight to the string.
10 mm steel plate strings
Inboard string
Strings set in from the tread ends, so the oak appears to float past the steel.
10 mm steel plate strings
Zigzag
A stepped steel string the same depth as the treads, wrapping each step.
String depth = tread depth · 10 mm plate
Not sure which suits your space?
Try each style on your own measurements in the 3D configurator.
Open the configuratorLet’s buildyour staircase.
Take the first step towards transforming your home or business with a staircase that’s truly one of a kind. Let us bring your vision to life. We are based in Norfolk, but cover most of mainland UK.